to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose re lating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rev.1.00, mar.10.2 004, page 1 of 6 h5n1503p silicon n channel mos fet high speed power switching rej03g0186-0100z rev.1.00 mar.10.2004 features ? low on-resistance ? low leakage current ? high speed switching outline to-3p 1 2 3 d s g 1. gate 2. drain (flange) 3. source absolute maximum ratings (ta = 25c) item symbol ratings unit drain to source voltage v dss 150 v gate to source voltage v gss 30 v drain current i d 70 a drain peak current i d (pulse) note1 210 a body-drain diode reverse drain current i dr 70 a avalanche current i ap note3 35 a avalanche energy e ar note3 91.8 mj channel dissipation pch note2 150 w channel to case thermal impedance ch-c 0.833 c/w channel temperature tch 150 c storage temperature tstg ?55 to +150 c notes: 1. pw 10 s, duty cycle 1% 2. value at tc = 25 c 3. stch = 25 c, tch 150 c
h5n1503p rev.1.00, mar.10.2 004, page 2 of 6 electrical characteristics (ta = 25c) item symbol min typ max unit test conditions drain to source breakdown voltage v (br)dss 150 ? ? v i d = 10 ma, v gs = 0 zero gate voltage drain current i dss ??1 av ds = 150 v, v gs = 0 gate to source leak current i gss ??0.1 av gs = 30 v, v ds = 0 gate to source cutoff voltage v gs(off) 3.0 ? 4.0 v v ds = 10 v, i d = 1 ma forward transfer admittance |yfs| 27 46 ? s i d = 35 a, v ds = 10 v note4 static drain to source on state resistance r ds(on) ? 0.022 0.027 ? i d = 35 a, v gs = 10 v note4 input capacitance ciss ? 5100 ? pf v ds = 25 v output capacitance coss ? 770 ? pf v gs = 0 reverse transfer capacitance crss ? 140 ? pf f = 1 mhz turn-on delay time td(on) ? 60 ? ns rise time tr ? 290 ? ns turn-off delay time td(off) ? 200 ? ns fall time tf ? 190 ? ns i d = 35 a v gs = 10 v r l = 2.14 ? rg = 10 ? total gate charge qg ? 135 ? nc gate to source charge qgs ? 30 ? nc gate to drain charge qgd ? 60 ? nc v dd = 120 v v gs = 10 v i d = 70 a body-drain diode forward voltage v df ?1.11.7vi f = 70 a, v gs = 0 note4 body-drain diode reverse recovery time trr ? 180 ? ns body-drain diode reverse recovery charge qrr ? 1.2 ? c i f = 70 a, v gs = 0 dif/dt = 100 a/ s notes: 4. pulse test
h5n1503p rev.1.00, mar.10.2 004, page 3 of 6 main characteristics 200 150 100 50 0 50 100 150 200 300 100 30 10 3 1 13 10 30 100 300 1000 0.3 0.1 1000 ta = 25 c channel dissipation pch (w) case temperature tc ( c) power vs. temperature derating drain to source voltage v ds (v) drain current i d (a) maximum safe operation area 100 s 1 ms pw = 10 ms (1shot) dc operatio n (tc = 25 c) 10 s operation in this area is limited by r ds(on) 100 80 60 40 20 0 4 8 12 16 20 200 160 120 80 40 0 246810 10 v v gs = 5 v 5.5 v tc = 75 c 25 c ?25 c drain to source voltage v ds (v) drain current i d (a) typical output characteristics 6 v gate to source voltage v gs (v) drain current i d (a) typical transfer characteristics v ds = 10 v pulse test pulse test 8 v 6.5 v gate to source voltage v gs (v) drain to source saturation voltage vs. gate to source voltage drain to source saturation voltage v ds(on) (v) 2.5 2 1.5 1 0.5 0 48 12 16 20 1 5 20 100 21050 0.2 0.1 0.05 0.02 0.01 i = 70 a d 35 a 10 a v = 10 v gs pulse test drain to source on state resistance r ds(on) (?) static drain to source on state resistance vs. drain current drain current i d (a) pulse test
h5n1503p rev.1.00, mar.10.2 004, page 4 of 6 0.100 0.080 0.060 0.040 0.020 ?40 0 40 80 120 160 0 0.2 0.5 2 5 20 50 100 100 20 50 5 10 2 0.5 1 0.2 110 25 c tc = ?25 c 75 c v = 10 v gs 10 a 35 a i = 70 a d case temperature tc ( c) static drain to source on state resistance r ds(on) (?) static drain to source on state resistance vs. temperature pulse test drain current i d (a) forward transfer admittance vs. drain current forward transfer admittance |yfs| (s) ds v = 10 v pulse test switching time t (ns) drain current i d (a) switching characteristics typical capacitance vs. drain to source voltage capacitance c (pf) drain to source voltage v ds (v) 0.1 0.3 1 3 10 30 100 1000 200 500 100 20 50 10 0 20 40 60 80 100 20000 50000 10000 1000 2000 5000 300 240 180 120 60 0 20 16 12 8 4 40 80 120 160 200 0 10000 1000 10 100 0.1 0.3 1 3 10 30 100 200 500 100 50 v = 30 v 60 v 120 v ds v = 0 f = 1 mhz gs ciss coss crss i = 70 a d v dd v gs body-drain diode reverse recovery time di / dt = 100 a / s v = 0, ta = 25 c gs v = 120 v 60 v 30 v ds r t d(on) t d(off) t t f v = 10 v, v = 75 v pw = 5 s, duty < 1 % r =10 ? gs dd g r t reverse drain current i dr (a) reverse recovery time trr (ns) gate charge qg (nc) drain to source voltage v ds (v) gate to source voltage v gs (v) dynamic input characteristics t f
h5n1503p rev.1.00, mar.10.2 004, page 5 of 6 0 0.4 0.8 1.2 1.6 2.0 200 160 120 80 40 5 4 3 2 1 -50 0 50 100 150 200 0 case temperature tc ( c) gate to source cutoff voltage vs. case temperature gate to source cutoff voltage v (v) gs(off) v = 10 v ds source to drain voltage v sd (v) reverse drain current i dr (a) reverse drain current vs. source to drain voltage pulse test v = 0 v gs 10 v 5 v i = 10ma d 1ma 0.1ma vin monitor d.u.t. vin 10 v r l v = 75 v dd tr td(on) vin 90% 90% 10% 10% vout td(off) vout monitor 10 ? 90% 10% t f switching time test circuit waveform 3 1 0.3 0.1 0.03 0.01 10 100 1 m 10 m 100 m 1 10 dm p pw t d = pw t ch ? c(t) = s (t) ch ? c ch ? c = 0.833 c/w, tc = 25 c tc = 25 c d = 1 0.5 0.2 0.1 0.05 0.02 0.01 1shot pulse pulse width pw (s) normalized transient thermal impedance s (t) normalized transient thermal impedance vs. pulse width
h5n1503p rev.1.00, mar.10.2 004, page 6 of 6 package dimensions 3.2 0.2 4.8 0.2 1.5 0.3 2.8 0.6 0.2 1.0 0.2 18.0 0.5 19.9 0.2 15.6 0.3 0.5 1.0 5.0 0.3 1.6 1.4 max 2.0 2.0 14.9 0.2 3.6 0.9 1.0 5.45 0.5 5.45 0.5 package code jedec jeita mass (reference value) to-3p ? conforms 5.0 g as of january, 2003 unit: mm ordering information part name quantity shipping container h5n1503p-e 30 pcs plastic magazine note: for some grades, production may be terminated. please contact the renesas sales office to check the state of production before ordering the product.
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.co m renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 renesas technology hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836 renesas technology taiwan co., ltd. fl 10, #99, fu-hsing n. rd., taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. 26/f., ruijin building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1, harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices ? 2004. renesas technology corp., all rights reserved. printed in japan. c olophon .1 .0
|
